A plate compactor is a powerful tool used in construction and paving projects to compact soil and asphalt. However, it can be frustrating when the plate compactor starts to stick to the asphalt surface, making it difficult to move and causing delays in the project.

Here are some tips for keeping your plate compactor from sticking to asphalt:

  1. Make sure the plate compactor is clean: Before starting the project, make sure that the plate compactor is clean and free of debris. Any dirt or debris on the plate can cause it to stick to the asphalt.
  2. Use a release agent: A release agent is a substance applied to the surface of the asphalt that prevents the plate compactor from sticking. There are several types of release agents available, including wax-based and water-based options.
  3. Adjust the water level: If the asphalt is too wet, the plate compactor may stick. To prevent this, make sure the asphalt has the proper moisture level. If the asphalt is too dry, you can add water to the surface to achieve the optimal moisture level.
  4. Use the correct compaction technique: Proper compaction technique is key to preventing the plate compactor from sticking. Make sure to follow the manufacturer’s instructions and apply the proper amount of force to the plate compactor when compacting the asphalt.
  5. Check the temperature: If the asphalt is too hot or too cold, it can cause the plate compactor to stick. Try to avoid using the plate compactor on asphalt that is outside of the recommended temperature range.

By following these tips, you can keep your plate compactor from sticking to the asphalt and ensure that your construction or paving project runs smoothly.

To get a premium quality plate compactor, check out our line here at https://thirdcoastequipment.com

Leave a Reply

Your email address will not be published. Required fields are marked *